A comparative study of fluorine substituents for enhanced stability of flexible and ITO‐free high‐performance polymer solar cells

Two low‐band gap polymer series based on benzo[1,2‐b:4,5‐b′]dithiophene (BDT) and dithienylbenzothiadiazole, with different numbers of fluorine substituents on the 2,3,1‐benzothiadiazole unit, have been synthesized and explored in a comparative study of the photochemical stability and operational lifetime in flexible large area roll‐coated bulk heterojunction solar cells. The two polymer series have different side chains on the BDT unit, namely 2‐hexyldecyloxy (BDT_HDO) ( P1–P3 ) or 2‐hexyldecylthiophene (BDT_THD) ( P4–P6 ). The photochemical stability clearly shows that the stability enhances along with the number of fluorine atoms incorporated on the polymer backbone. Fabrication of the polymer solar cells based on the materials was carried out in ambient atmosphere on a roll coating/printing machine employing flexible and indium‐tin‐oxide‐free plastic substrates. Solar cells based on the P4–P6 series showed the best performance, reaching efficiencies up to 3.8% for an active area of 1 cm², due to an enhanced current compared to P1–P3 . Lifetime measurements, carried out according to international summit on OPV stability (ISOS), of encapsulated devices reveals an initial fast decay for P1–P6 in the performance followed by a much slower decay rate, still retaining 40–55% of their initial performance after 250 h of testing under ISOS‐L‐1 conditions. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 893–899     

Ultra-stable microwave generation with a diode-pumped solid-state laser in the 1.5-μm range

We demonstrate the first ultra-stable microwave generation based on a 1.5-μm diode-pumped solid-state laser (DPSSL) frequency comb. Our system relies on optical-to-microwave frequency division from a planar-waveguide external cavity laser referenced to an ultra-stable Fabry–Perot cavity. The evaluation of the microwave signal at ~10 GHz uses the transportable ultra-low-instability signal source ULISS^®, which employs a cryo-cooled sapphire oscillator. With the DPSSL comb, we measured ?125 dBc/Hz phase noise at 1 kHz offset frequency, likely limited by the photo-detection shot-noise or by the noise floor of the reference cryo-cooled sapphire oscillator. For comparison, we also generated low-noise microwave using a commercial Er:fiber comb stabilized in similar conditions and observed >20 dB lower phase noise in the microwave generated from the DPSSL comb. Our results confirm the high potential of the DPSSL technology for low-noise comb applications.     

Misparametrization subsets for penalized least squares model selection

Identifying a model by the penalized contrast procedure, we give an analytical estimation of misfitting subsets in the specific case of a least squares contrast. Then, specifying the statistical model, this allows to determine penalization rates ensuring a consistent identification. Applications are given to time series and geostatistical identification.     

Study of aerodynamic and release properties of inhaled particles containing cyclodextrins

The aim of this study was to investigate the influence of different cyclodextrins (CyD) on physical characteristics of inhalation dry powders. The particle size was characterised by Aerosizer^® LD and aerodynamic behaviour of inhaled complexes assessed by twin-stage liquid impinger. The in vitro release profile of the powders was studied through Franz cell modified method. Produced particles showed a suitable size for pulmonary delivery, ranging between 1 and 5 μm. The nature of the CyD affected the powders performance on reaching the lower compartment (“Lungs”), mainly by the altering their aerodynamic properties, which is reflected on the different percentages of their emitted respirable fractions. HP-γ-CyD:fluticasone propionate complex showed a fast release of corticosteroid while γ-CyD had a constant release throughout time. The best characteristics for pulmonary delivery were obtained with acetyl-γ-CyD:fluticasone propionate complex.     

Electrochemical Sensing of Uric Acid Using Glassy Carbon Modified with Multiwall Carbon Nanotubes Dispersed in Polyethylenimine

This work reports the advantages of using glassy carbon electrodes modified with multiwall carbon nanotubes (MWCNT) dispersed in polyethylenimine (PEI). The presence of MWCNTs wrapped by PEI largely facilitated the strong adsorption of uric acid (UA) and allowed its highly sensitive and selective quantification even in the presence of high excess of ascorbic acid. The selected conditions for the electrochemical sensing were 5 s accumulation at ?0.300 V under stirring and quantification in a 0.050 M phosphate buffer solution pH 7.40 by differential pulse voltammetry adsorptive‐stripping after medium exchange. The platform allowed the successful application in the quantification of UA in urine.     

Ultra performance liquid chromatography – mass spectrometry studies of formalin‐induced alterations of human brain lipidome

The development of ‘omics’ sciences offers new opportunities for the study of neurodegenerative diseases but increases at the same time the sample demand on brain banks that collect and store valuable human post‐mortem tissue. Our study aims to evaluate in lipidomics the potential of formalin‐fixed tissue compared with the cryopreservation method, considered as the gold standard for biochemical research. Two complementary liquid chromatography/mass spectrometry analytical platforms were used on the basis of hybrid quadrupole time‐of‐flight and triple quadrupole mass spectrometers. Untargeted fingerprinting, semitargeted profiling of specific lipid classes and targeted monitoring of lipid species were performed in formalin‐fixed and cryopreserved samples to provide detailed information at the molecular level on the formalin‐induced alterations of the brain tissue. In vitro incubations of lipid standards were also performed to further describe the degradation processes induced by formaldehyde. Phospholipid compounds were found to be extensively hydrolysed, whilst the sphingolipid ones were preserved. N‐methylation and N‐formylation of amine‐containing phospholipids have also been evidenced. These findings show that the potential detrimental effect of formalin on the analytes of interest must be taken into account when analysing formalin‐fixed samples. Copyright © 2014 John Wiley & Sons, Ltd.     

Numerically stable,scalable formulas for parallel and online computation of higher-order multivariate central moments with arbitrary weights

Formulas for incremental or parallel computation of second order central moments have long been known, and recent extensions of these formulas to univariate and multivariate moments of arbitrary order have been developed. Such formulas are of key importance in scenarios where incremental results are required and in parallel and distributed systems where communication costs are high. We survey these recent results, and improve them with arbitrary-order, numerically stable one-pass formulas which we further extend with weighted and compound variants. We also develop a generalized correction factor for standard two-pass algorithms that enables the maintenance of accuracy over nearly the full representable range of the input, avoiding the need for extended-precision arithmetic. We then empirically examine algorithm correctness for pairwise update formulas up to order four as well as condition number and relative error bounds for eight different central moment formulas, each up to degree six, to address the trade-offs between numerical accuracy and speed of the various algorithms. Finally, we demonstrate the use of the most elaborate among the above mentioned formulas, with the utilization of the compound moments for a practical large-scale scientific application.     

A higher resolution edge‐based finite volume method for the simulation of the oil–water displacement in heterogeneous and anisotropic porous media using a modified IMPES method

In this article, we present a higher‐order finite volume method with a ‘Modified Implicit Pressure Explicit Saturation’ (MIMPES) formulation to model the 2D incompressible and immiscible two‐phase flow of oil and water in heterogeneous and anisotropic porous media. We used a median‐dual vertex‐centered finite volume method with an edge‐based data structure to discretize both, the elliptic pressure and the hyperbolic saturation equations. In the classical IMPES approach, first, the pressure equation is solved implicitly from an initial saturation distribution; then, the velocity field is computed explicitly from the pressure field, and finally, the saturation equation is solved explicitly. This saturation field is then used to re‐compute the pressure field, and the process follows until the end of the simulation is reached. Because of the explicit solution of the saturation equation, severe time restrictions are imposed on the simulation. In order to circumvent this problem, an edge‐based implementation of the MIMPES method of Hurtado and co‐workers was developed. In the MIMPES approach, the pressure equation is solved, and the velocity field is computed less frequently than the saturation field, using the fact that, usually, the velocity field varies slowly throughout the simulation. The solution of the pressure equation is performed using a modification of Crumpton's two‐step approach, which was designed to handle material discontinuity properly. The saturation equation is solved explicitly using an edge‐based implementation of a modified second‐order monotonic upstream scheme for conservation laws type method. Some examples are presented in order to validate the proposed formulation. Our results match quite well with others found in literature. Copyright © 2016 John Wiley & Sons, Ltd.     

On Barycentric Interpolation. II (Grünwald–Marcinkiewicz type Theorems)

Grünwald–Marcinkiewicz type theorems with respect to barycentric Lagrange interpolation based on equidistant and Chebyshev node-sytems in [–1, 1] are proved. It turns out that the results are very similar to the ones known for the classical Lagrange interpolation.